The Evaporator Coil Temperature 1 Sensor Fail alarm occurs when Evaporator Coil 1 (EC1) fails due to an open circuit or by exceeding its input range. The sensor is a 10 kohm type 3 …

Page 262 • For CO alarm notification, model PG9913 or PG9933 shall be enrolled on the system (zone type is 24h CO). Both CO detectors provide T4 CO alarm signal independent of the …

The MX1 can be configured to respond to a smoke alarm with only a local alert and without registering the alarm at the fire panel unless a heat detector or other alarm occurs, or a …

The user-app activation which is done by the ‘connect alarm activation’ mobile-app can be performed only when there is an active connection between the power-manage server and the …

Jun 6, 2024 · Must be set up as Exhaust or Variable Frequency Fan. Fan VFD Input trips. Must be set up as NOT Single Speed. Three APS trips within 1.5 hours. If APS is installed or based on …

Links and resources for Johnson Controls technical documents.

View & download of more than 8416 Johnson Controls PDF user manuals, service manuals, operating guides. Air Conditioner, Controller user manuals, operating guides & specifications.

Apr 3, 2025 · What is the Alarm Manager and the Alarm Monitor? You can view and take action on all alarms that occurred in your Metasys system with the Alarm Manager and the Alarm …

This icon is used with clock digits 1 and 2 to indicate activated zones (not alarm) on the sys- tem. When zones are opened, the OPEN icon will turn on, and 7 segment displays 1 and 2 will …

Apr 1, 2021 · Program the trip point, hysteresis and delay time of each alarm through the Menu. For example, Alarm 1 defaults to a 50 ppm CO trip point, 10 ppm hysteresis, and 2 min delay …