AN1115: Configuring Peripherals for 32-Bit Devices using Hardware Configurator In Zigbee EmberZNet SDK version 6.10.x and lower, peripherals are configured using the Hardware …

3. Hardware Configuration File The hardware configuration file is used to configure the hardware features such as TX power, UART, hardware timers, and GPIO set-ting of your Silicon Labs …

The hardware configuration file is used to configure the hardware features such as TX power, UART, SPI, hardware timers, and GPIO settings of your Bluegiga Bluetooth Dual Mode device.

AN0046: USB Hardware Design Guidelines This application note gives recommendations on hardware design for implementing USB host and device applications using USB capable …

Simplicity Studio simplifies IoT development by giving developers everything needed to complete projects using an integrated development environment (IDE).

Below is an example for a hardware configuration that works with the DKBLE development kits and the setup used in them. Figure 4: Hardware configuration for the external SPI flash The …

UG103.4: HAL Fundamentals Silicon Labs HAL (Hardware Abstraction Layer) is program code between a system’s hardware and its software that provides a consistent interface for …

The hardware configuration in the module-side component of a BGAPI/BGLib project is critical, since it must define the UART peripheral interface used for BGAPI control from the external host.

UG161: WGM110 Wi-Fi ® Module Configuration Guide This document describes how to define and configure software projects for the Silicon Labs Wizard Gecko WGM110 Wi-Fi® Module. It …

AN0948.2: EFM32 and EFR32 Series 2 DC-to-DC Converter This application note provides an overview of the integrated DC-to-DC converter (DC-DC) on EFM32 and EFR32 Series 2 devi …